Samsung 570DX - SyncMaster - 57" LCD Flat Panel Display Service Manual Download Page 17

Page: 17 / 122

3. Alignment and Adjustments

3-15

- Info Grid shows some basic information necessary to

Image Size Control.

1) Click the Video Source tab to adjust the Image Size of

AV, S-Video, TV, Component, or DVI(HDCP). Click Select

All or use Check Box to select a display to control.

2) Info Grid displays only the display having AV, S-Video,

TV, Component, or DVI(HDCP) as input source

3) Adjust the Image Size of the display.

If the input signal for the component or DVI(HDCP) is

720p or 1080, Zoom1 and Zoom are not available.

- The Image Size Control feature is available only for

the displays whose power status is ON.

-Image Size Control - Video Source

1. Click Image Size of the main icons to display the Image Size window.

- Info Grid shows some basic information necessary to Time

Control.

1) Current Time

Set the current time for the selected display (PC Time).

Set the PC time before you change the current time.

2) On Time Setup

Set the hour, minute, AM/PM of On Time, Status, Source,

and Volume of the selected display.

3) Off Time Setup

Set the hour, minute,, and AM/PM, and Status for Off

Timer of the selected display.

4) Shows the On Timer settings.

5) Shows the Off Timer settings.

- Time Control is available only for the displays for

whose the power status is ON.

-Time Control

1. Click Time of the main icons to display the Time Control window.

Summary of Contents for 570DX - SyncMaster - 57" LCD Flat Panel Display



























































































































Search results

Summary of Contents for 570DX - SyncMaster - 57" LCD Flat Panel Display

Reviews:

Related manuals for 570DX - SyncMaster - 57" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 570DX - SyncMaster - 57" LCD Flat Panel Display, Service Manual

Search results

Summary of Contents for 570DX - SyncMaster - 57" LCD Flat Panel Display

Reviews:

Related manuals for 570DX - SyncMaster - 57" LCD Flat Panel Display

Brands by name

Popular brands