Samsung 320MX - SyncMaster - 32" LCD Flat Panel Display User Manual Download Page 92

Page: 92 / 189

Name: Changes the area name.

You cannot use a name already used for another area name.

Lock Position: Locks the position of the area.

Left, Top, Width, Height: Changes the position and size of the area.

The area positions must be within the background and the area size cannot be larger than the
background size.

Start Time, Stop Time, Duration: Sets the playing time in seconds.

It cannot be longer than the background playing time.

Screen

Website: Sets a web page to display in the Web area.

Only one URL can be selected in the Web Area.

Refresh: Sets the refresh time for the URL displayed in the Web area.

Input Enable: You can input using the mouse in the Web area.

Offset Left /Top / Right / Bottom: Moves the position of the web page in the Web area.

Scroll: Turns the scrollbar for web pages on or off.

Border: Shows or hides the border for web pages in the Web area.

Summary of Contents for 320MX - SyncMaster - 32" LCD Flat Panel Display






























































































































































































Search results

Summary of Contents for 320MX - SyncMaster - 32" LCD Flat Panel Display

Reviews:

Related manuals for 320MX - SyncMaster - 32" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 320MX - SyncMaster - 32" LCD Flat Panel Display, User Manual

Search results

Summary of Contents for 320MX - SyncMaster - 32" LCD Flat Panel Display

Reviews:

Related manuals for 320MX - SyncMaster - 32" LCD Flat Panel Display

Brands by name

Popular brands