Samson Type 5824, Mounting And Operating Instructions

Page: 39 / 64

EB 5824-1 EN 10-1
Servicing
10 Servicing
The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.
The electric actuator was checked by
SAMSON before it left the factory.
− The product warranty becomes void if
service or repair work not described in
these instructions is performed without
prior agreement by SAMSON's After-sales
Service.
The actuator requires no maintenance.
We recommend inspection and testing ac-
cording to Table 10-1.
Table 10-1: Recommended inspection and
testing
Inspection and testing Action to be taken in the event of a negative
result
Check the markings, labels and nameplates on
the electric actuator for their readability and com-
pleteness.
Î
Immediately renew damaged, missing or
incorrect nameplates or labels.
Î
Clean any inscriptions that are covered with
dirt and are illegible.
Check the electric wiring.
Î
Tighten any loose terminal screws (see the
'Installation' section).
Î
Renew damaged wires.
Note