Samson Type 5824, Mounting And Operating Instructions

Page: 26 / 64

5-4 EB 5824-1 EN
Installation
Risk of damage to the actuator due to in-
correct connection of the voltage.
Î
Do not apply a voltage to eL and aL at
the same time.
4. Fasten valve and actuator together using
the coupling nut.
Tightening torque 20 Nm
"Actuator stem retracts" fail-safe action
Î
Place the actuator on the valve connec-
tion and fasten with the coupling nut.
Tightening torque 20 Nm
5.4.4 Type 5825: form-fit
attachment
Î
Mount the actuator with fail-safe action
(stem extends or retracts) according to
section 5.4.2.
5.5 Installing the control valve
into the pipeline
Degree of protection not achieved due to
incorrect mounting position.
Î
Install the control valve according to sec-
tion 5.1.
NOTICE !
NOTICE !
Risk of actuator damage due to direct con-
tact with steam.
Î
During mounting, make sure that the
actuator cannot come into contact with a
jet of steam during operation.
Î
Install the valve into the pipeline accord-
ing the specifications in the mounting
and operating instructions of the valve.
NOTICE !