background image

3

Stage 412: Quad Handheld Wireless System

Important Safety Information

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR 

BACK) AS THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO 

QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is 

intended to alert the user to the presence of non-insulated “dangerous voltage” 

within the product’s enclosure that may be of sufficient magnitude to constitute 

a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user 

to the presence of important operating and maintenance instructions in the 

literature accompanying the appliance.

ATTENTION

RISQUE DE CHOC ÉLECTRONIQUE - 

NE PAS OUVRIR

 If you want to dispose this product, do not mix it with general household waste. There is a 
separate collection system for used electronic products in accordance with legislation that 
requires proper treatment, recovery and recycling.

Private household in the 28 member states of the EU, in Switzerland and Norway may return 
their used electronic products free of charge to designated collection facilities or to a retailer (if 
you purchase a similar new one).
For Countries not mentioned above, please contact your local authorities for a correct method of 
disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery 
and recycling and thus prevent potential negative effects on the environment and human health.

Summary of Contents for STAGE 412

















Reviews: