Samson 5007-2 Series, Mounting And Operating Instructions

Page: 6 / 72

1-2 EB 9511 EN
Safety instructions and measures
Revisions and other modifications
Revisions, conversions or other modifications of the product are not authorized by SAMSON.
They are performed at the user's own risk and may lead to safety hazards, for example. Fur
-
thermore, the product may no longer meet the requirements for its intended use. Use of the
device is no longer permitted in this case.
Warning against residual hazards
To avoid personal injury or property damage, operators and operating personnel must pre-
vent hazards that could be caused in the device by taking appropriate precautions. Plant op -
erators and operating personnel must observe all hazard statements, warning and caution
notes in these mounting and operating instructions, especially for installation, start-up and
service work.
Responsibilities of the operator
Operators are responsible for proper use and compliance with the safety regulations. Opera-
tors are obliged to provide these mounting and operating instructions to the operating per-
sonnel and to instruct them in proper operation. Furthermore, operators must ensure that op-
erating personnel or third parties are not exposed to any danger.
Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the specified hazard statements, warning and caution notes. Furthermore, the operat -
ing personnel must be familiar with the applicable health, safety and accident prevention
regulations and comply with them.
Referenced standards, directives and regulations
Devices with a CE marking fulfill the requirements of the Directives 2014/53/EU and
2011/65/EU.
The 'Certificates' section contains this declaration of conformity.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Operating Instructions (SAM Connect Gateway – Configuration with TROVIS-VIEW)
u
EB 9511-2
− Mounting and operating instructions for connected components (Media 5, Media 6)