Samson 3349, Mounting And Operating Instructions

Page: 32 / 104

4-4 EB 8048-2 EN
Shipment and on-site transport
slings against slipping by using a con-
nector.
2. Carefully lift the control valve. Check
whether the lifting equipment and acces-
sories can bear the weight.
3. Move the control valve at an even pace
to the site of installation.
4. Install the valve into the pipeline (see the
'Installation' section).
5. After installation into the pipeline: de-
pending on the type of connection (e.g.
welding joint, flanged joint etc.) check
whether the valve in the pipeline holds.
6. Remove slings.