Sampo Rosenlew HR46, Instruction Manual

Page: 54 / 119

- 54 - - 55 -
32
4. Checking of the condition of traction
transmission
Check the attachment and condition of hub
motors.
Check the attachment of the hydraulic pumps.
Check for leaks in hose connections.
5. Cleaning of cab air filter
Remove the cab fresh air filter with its hous-
ing and clean it carefully with compressed air.
Replace a soiled or broken filter. The paper
filter shall be replaced at least once a year.
Check also the condition of the air intake
suction channel.
6. Checking of light operations
Make sure the headlights, working lights, turn-
ing signals and signal lights function prop-
erly. When replacing bulbs, comply with the
Manufacturer´s recommendations.
7. Draining of water out of water separator
The fuel pre-filter with water separator is located
on the left side of the engine Drain any accumu-
lated water into a dish weekly. Replace the filters
in compliance with the service table or more
often if you suspect a clogged filter. Fault code
“Fuel pressure low” indicates a clogged pre-fil-
ter or air leakage in the pipes. When changing
the filter, remember to take the metal water
separator plug from the old filter.
Used filters are problem waste that must be
dealt with accordingly. For further instructions,
refer to the engine manual.
8. Checking of brake functions
9. Check Fan Belt Tightness
The engine is equipped with a spring loaded
belt tensioner and the belt is of V-ribbed type.
The tensioner tightens the belt automatically
during the operation.
Check the belt visually. Change a worn, oily or
damaged belt.