manualshive.com logo in svg

Sampo Rosenlew HR46, Instruction Manual

Share
Download
Sampo Rosenlew HR46 Instruction Manual Download Page 26

- 26 -

- 27 -

10

11

Seat has several

 adjustments (fig. 10)

1.  To adjust the fore and aft position of the seat, 

lift lever A and move the seat in the required 
direction.

2.  Adjust the height using forks B at the front and 

back of the seat.

3.  Adjust the suspension using lever C.
4.  Adjust the backrest angle using lever D.

Air suspended seat has 

more adjustments (fig. 11)

1.  To adjust the fore and aft position, unlock 

lever A and move the seat in the required 
direction.

2.  Adjust the height and fore/aft tilt by pressing 

levers B on the side of the seat and lifting/
depressing the front or rear of the seat.

3.  Adjust the seat suspension pneumatically by 

pressing button C.

4.  Adjust the backrest angle using lever D.
5.  If the seat has side tilt, it can be tilted using 

the regulator unit on the armrest.

Summary of Contents for HR46
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands