www.larius.com
26
THOR
ED.
17 - 09/2020 - Cod. 150096
Fig. 1M
Fig. 2M
Fig. 3M
Fig. 4M
CORRECT PROCEDURE OF DECOMPRESSION
M
Clamp released
Clamp inserted
OFF
M4
M1
M2
M3
Make sure that the electrical system is earthed
and complies with regulations.
WARNING
:
If the equipment is still under pressure after performing the operations above described because of the nozzle
or the flexible hose clogged, proceed as follows:
•
Loosen very slowly the gun nozzle.
•
Release the clamp.
•
Point the gun at the container of the product and press the trigger to release pressure.
•
Loosen very slowly the fitting of connection from the flexible hose to the gun.
•
Clean or replace the flexible hose and the nozzle.
• Zero the pressure regulator knob
.
• Move the switch (
M1
)
to the
OFF
(0)
position to stop the
equipment.
• Open the discharge tap (
M2
) to discharge the residual pres
-
sure, always turning it anticlockwise
.
• Point the gun at the tank (
M3
) of the product and press the
trigger to release pressure. At the end of the operation, insert
the gun clamp (
M4
).
