www.larius.com
13
THOR
ED.
17 - 09/2020 - Cod. 150096
Fig. 10H
Fig. 11H
MIN
MAX
Absolutely avoid to spray solvents indoors. In
addition, it is recommended to keep away from
the pump in order to avoid the contact between
the solvent fumes and the electric motor.
For disposing of the washing liquid, see the
requirements laid down in the Standards in force
in the country in which the equipment is used and
act accordingly.
The Client is solely responsible for any irregular
action taken before, during, or after disposing of
washing liquid, or in interpreting and applying the
current Standards in this regard.
Make sure the product to be used is compatible
with the materials employed for manufacturing
the equipment (
stainless steel and aluminium
).
Because of that, please contact the supplier of
the product.
Use a metal container (H7).
To avoid any risk of electric shock connect the
collection container to a surface that is earthed
(e.g. concrete)
and not to surfaces that will insulate
the container from the earth.
H6
H7
H3
Circulation
and washing
• Turn the pressure setting knob (
H6
) clockwise to the
“CIRCULATION & WASHING” position
(drop symbol)
.
• Point the spray gun into the collection container (
H7
)
and
hold the trigger down
(in order to expel the oil contained)
until clean liquid flows out
.
Now, release the trigger.
• Remove the suction hose and remove the bucket of cleaning
liquid.
•
Now point the spray gun
(
H3
) into the container (
H7
)
and
press the trigger to recover any cleaning liquid left
.
•
As the pump idles, press the
“
OFF”
(0)
switch (
H5
)
to stop
the tooling.
When this is complete, release the trigger
.
• Now the machine is ready
.
When water-based paint has been used, in addition to
washing using the cleaning liquid, we recommend washing
with soapy water and then clean water
.
• Mix and filter the product before using it
.
Hold the spray gun against the edge of the metal
contained (H7).
Make sure the product is suitable to be used with
an airless spray gun.
PREPARING THE PRODUCT
