Fig. 9M
Fig. 6M
Fig. 7M
STOP
Fig. 10M
Fig. 8M
Fig. 11M
• Rotate the control lever (
M2
) downward until the pressing
plate (
M7
) arrives near the edge of the drum.
• Stop the descent of the hoist by turning the control lever
(
M2
) to the intermediate position.
• Grease the pressing plate gasket (
M7
) and the internal surface
of the drum.
• Center the drum (
M5
) correctly on the plate (
M8
) so that it is
aligned with the pressing plate (
M7
).
• Lock the clamps (
M6
) to secure the drum (
M5
).
• Close the relief valve (
M9
) located on the pressing plate (
M7
).
NOTE
The rod (M9) of the vent valve must not be completely
unscrewed.
www.larius.com
15
ED. 10 - 07/2020 - Cod. 150133
Pneumatic hoist twin mast for 200 litres
M2
M6
M2
M4
M7
M5
M4
M8
M7
M9
M7
