Sammode SA
N° : 415 034 rév. H
24, rue des Amandiers – F 75020 Paris
8/12
Décembre 2015
EN
CONFORMITY DECLARATION
I undersigned Rudy Bigand, Technical Director of the company Sammode SA, located at 24 rue des Amandiers 75020
PARIS, declares that following products (group IIIC category 2D and group IIC category 2G) :
-
LFSe 118, LAMARCK 1x18 -
1 lamp T8 18 W G13 / Classe 1 ou 2 / 115 or 230 Volts / 50-60-0Hz
-
LFSe 136, LAMARCK 1x36 -
1 lamp T8 36 W G13 / Classe 1 ou 2 / 115 or 230 Volts / 50-60-0Hz
-
LFSe 158, LAMARCK 1x58 -
1 lamp T8 58 W G13 / Classe 1 ou 2 / 115 or 230 Volts / 50-60-0Hz
-
LFSe 218, LAMARCK 2x18 -
2 lamps T8 18 W G13 / Classe 1 ou 2 / 115 or 230 Volts / 50-60-0Hz
-
LFSe 236, LAMARCK 2x36 -
2 lamps T8 36 W G13 / Classe 1 ou 2 / 115 or 230 Volts / 50-60-0Hz
-
LFSe 258, LAMARCK 2x58 -
2 lamps T8 58 W G13 / Classe 1 ou 2 / 115 or 230 Volts / 50-60-0Hz
meet the following regulatory requirements:
ElectroMagnetic compatibility Directive (EMC) 201/30/UE
To ensure compliance the product meets specific standards lighting fixtures: EN 55015 relating to radio disturbance
and EN 61547 on immunity. Moreover, the active components are themselves in conformity with the EMC Directive
Low Voltage Directive (LVD) 2006/95/EC of 12 December 2006
To ensure compliance the product meets the standards of fixtures series EN 60598, the active components are
themselves consistent with the LVD.
All equipment leaving the assembly shall be test operation and safety, especially dielectric and earthing continuity.
Decree No. 2005-829 of 22 July 2005
Directives 2011/65/UE (on the restrictions on the use of certain hazardous substances in Electrical and Electronic
Equipment) Directive 2012/19/UE and (Known as WEEE, Waste Electrical and Electronic Equipment).
ATEX Directive 94/9/EC of 23 mars 1994
To ensure compliance the product meets the followings standards :
-
EN 60079-0:2012/A11 :2013 (Explosive Atmospheres - Equipment – General requirements),
-
EN 60079-7 : 2007 (Explosive atmospheres - Equipment protection by increased safety "e"),
-
EN 60079-18 : 2015 (Electrical apparatus for explosive gas atmospheres - Part 18: Construction, test and
marking of type of protection encapsulation "m" electrical apparatus)
-
EN 60079-1: 2014 (Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d")
-
EN 60079-31 : 2014 (Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t")
-
The EC-type examination certificate INERIS 02 ATEX 0086X delivered by the notified body INERIS, 0080, F-60550
Verneuil-en-Halatte.
Paris 14 December 2015
RUDY BIGAND
Technical Director
The notified body involved in the production control stage, or the product itself is : INERIS, n° 0080, F-60550 Verneuil-
en-Halatte.
