Samlexpower Evolution EVO-2212, Owner'S Manual

Page: 107 / 136

14 | SAMLEX AMERICA INC. SAMLEX AMERICA INC. | 15
APPENDIX A
SECTION 4 | Parameter Setup
4.3 PASSWORD PROTECTION FOR PARAMETER CHANGE
All parameters except Time and Date are protected with a Password. When the required pa-
rameter screen is reached and is displayed and
Enter
Key is pressed to modify the parameter
value, the system will request a 4-digit Password. The Password is 8052 . Once you Enter the
Password correctly, you don’t need to enter the Password again until until any key is not pressed
for over 60 seconds. An example of Parameter setting is shown at Section 4.3.1 below:
4.3.1 Example of Changing Bulk Current Setting – From Default 40A to 50A
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
Starting from any Operating Mode Screen (Fig 3.2), press Enter key and
Up/Down Keys to select Group 1 "Charge Curve" screen from the
"Select Group" Menu Map (Fig 4.3).
Press Enter Key to go to Parameter Screens under "Charge Curve".
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
Press
Up/Down
Key to select Bulk Current parameter. Default current
setting of 40A will be displayed.
Press Enter key to change Bulk Current parameter setting. A Password
will be requested.
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
Press Up/Down key to change each number. When displayed value
is correct, a
short
press of the
Enter
Key will confirm this value and
move to the next digit to the right. A
long
press of the Enter Key is
used to write the parameter selection (the Password in this case).
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
Flashes twice when Password is correct. (8052)
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
Flashes twice when Password is not correct.
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
Press Up/Down Key to change number to 50.
Short press Enter Key to shift right, long press Enter key to set.
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
An exclamation sign ‘!’ is shown when the parameter is out of the
specified programming range. For example, if 90A was entered for
EVO-2224 (EVO-2224 range is 0-70A), it will be out of range and an
exclamation sign ‘!’ will be displayed.
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
Writing to the inverter.
KEY IN PASSWORD
0000
SELECT GROUP
CHARGE CURVE
BULK CURRENT
40 A
PASSWORD CORRECT
PASSWORD ERROR!!
BULK CURRENT
40 A
BULK CURRENT
90 A
!
WRITING...
50 A
WRITE SUCCESS!
50 A
WRITE FAILURE!
50 A
OUT OF RANGE!
90 A
BULK CURRENT
50 A
Flashes twice when writing is successful.