24
ENG
9
Using the Charger
Figure 22 Fan Speed
9.5 Functional check
The status LED in the front of the unit can be used to check the status of the charging
process.
Note
The optional remote controller can also be used to check the status of the charging process. The LEDs
on the remote controller indicate different charging phases with their colors respectively.
Table 9-2 Normal Functional Check Table
"E.Q." LED
"STATUS" LED
Status
Red, constantly lit
I phase
Orange, constantly lit
Uo phase
Green, constantly lit
U phase
Red, constantly lit
Red, constantly lit
I phase, Equalization
is activated
Red, constantly lit
Orange, constantly lit
Uo phase, Equalization
is activated
Red, constantly lit
Green, constantly lit
U phase, Equalization
is activated
Red, constantly lit
Equalization is executed
Red, flashing
I phase, half power
Orange, flashing
Uo phase, half power
Green, flashing
U phase, half power
Green, double flashing
Power supply mode
Red, slowly flashing
Stand-by mode
(RC-600/RC-601D)
Summary of Contents for WSC-1250
