SAMES KREMLIN
Page 3
Manual : 573.005.212
2. DESCRIPTION
The REGULEX® system consists of a REGULEX® proportioning gun and a control bay.
The REGULEX® proportioning gun is designed to dispense mastic beads or single or two-component
adhesive beads.
The REGULEX® system is normally mounted on a robot or a multi-axis table. The manipulator sends
a signal to the control bay to provide the necessary output to dispense the bead.
The flow as well as the proportioning are programmable and electronically controlled thanks to the
control bay.
The following applications can be carried out :
Constant diameter at constant speed.
Variable diameter at contant speed.
Constant
diameter at variable speed.
Variable diameter at variable speed.
The materials can be applied cold or hot depending upon the use conditions and the kind of
REGULEX® gun.
The heating kit enables to maintain the temperature, the fluid must be heated first by means of
the filling pump and of the heated hoses.
PRINCIPLE OF THE REGULEX® SYSTEM
The main function of the REGULEX® system is to control and regulate the dispensing of the
material bead.
As it is in relation with the robot and depending upon the flow information that is sent periodically
by the robot, it will act on the piston of the chamber to give in the shortest time possible the flow
asked by the robot.
