SAMES KREMLIN
Page 16
Manual : 573.199.112
CONNECTION OF THE CONTROL BOX AND OF THE FLUID FRAME
The PU 3000 must be connected to
a dry and clean compressed air
network (minimum 4 bar / 58 psi) and
to a single phase electric supply (115V
/ 230V) connected to an isolating
switch. The electric supply must have
an appropriate protection (30 mA).The
network ground will be connected in
the control box on a connect provided
and identified with the symbol
.
Before connecting the PU
3000, be certain the mains voltage is
the same as the one of the machine
(230 V).
If no, open the electric box removing
the protective housing and move the
jumper (230V
115V).
The machines with a stabilized electric
supply tolerate all voltage types (115V /
230V).
Connect the air equipment of the PU
3000 to the pneumatic network with a
conductive hose (minimum 16 mm / 5/8
dia).
Nota : these hoses are not supplied
in the standard version.
The air connection of the machine is
Female 3/4 BSP (air inlet valve).
The connection between the control
box and the electrovalves located on
the frame, is carried out via cable,
length : 8 m / 26.2".
Between the mixer outlet and the spray
gun, you must install a fluid hose,
model HP (high pressure) (
act
according to the pressures the pumps
supply).
Fuse 160 mA
for machine with serial number < to 09Y1080
Fuse 315 mA
for machine with serial number >to 09Y1080
Machine with a stabilized electric supply
Summary of Contents for PU3000 4L 30/1
Page 63: ...SAMES KREMLIN Page 51 Manual 573 199 112 SPECIFICATIONS PU 3000 PUMP model Airless...
Page 68: ...SAMES KREMLIN Page 56 Manual 573 199 112 SPECIFICATIONS PU 3000 PUMP model 4 L 30 1...
Page 73: ...SAMES KREMLIN Page 61 Manual 573 199 112 SPECIFICATIONS PU 3000 PUMP model 4 L 53 1...
Page 79: ...SAMES KREMLIN Page 67 Manual 573 199 112 SPECIFICATIONS PU 3000 PUMP model 4 L Flowmax 53 1...