Index revision : A
25
7143
4.2.8. Installation of the door
WARNING : Before installing the door, it is imperative to check that the width of the booth ope-
ning respects the dimension of 950 mm from bottom to top and check the perpendicularity of
the side panels in respect to the bottom box with an angle of a minimum length of 1 m.
Step 1
: Place the door (
3
) on the booth (
2
).
Step 2
:
Loosely
position the 3 hinges (1) with 4
screws M6 x 16 per hinge.
Step 3
:
Before tightening
, make sure there is a
clearance of 3 mm all around the door.
Step 4
: Lock the brace spacings.
Step 5
: Tighten the side panels permanently to
the bottom box.
4.2.9. Lighting installation
Step 1
: Place the seal (
2
) on the box (
1
).
Step 2
: Connect the power cable to the lighting
unit (
3
) and feed the cable through the hole at
the bottom of the box (
1
) and through the stuf-
fing box (4). Attach the stuffing box (
4
) to the box
(
1
).
Step 3
: Recess the lighting unit (3) into the hou-
sing (
1
) and fix it with its seal (
2
) to the side panel
with 10 M6 x 16 screws.
Step 4
: Connect the power cable to the power
supply of the installation.
Step 5
: Repeat the procedure for the other lights.
DES07505
3
2
1
DES07504
1
2
3
4
