14
Member of Exel group
DRT582165110
A - 2023/03
1.2.3. Glossary
Base
Component A
Catalyst
Component B, may also be referred to as hardener.
Thinner
Component C
Product ratio
For a product made of 2 components, a base (A) and a catalyst (B) are used.
The ratio R corresponds to the ratio B / A. If R = 10% it will be necessary that the mixture consists of 10 volumes of
B for 100 volumes of A.
For a product made of 3 components, we use a base (A), a catalyst (B) and a diluent (C).
The ratio R1 corresponds to the ratio B / A. If R1 = 10%, the mixture must consist of 10 volumes of B for 100 volumes
of A.
The ratio R2 corresponds to the ratio C / A. If R2 = 5%, the mixture must be made up of 10 volumes of C for 100
volumes of A.
Alarm
A malfunction detected by the Cyclomix
®
Evo but which does not stop it. An alarm is a preventive information given
to the user that appears on the screen via a banner.
Défaut
A malfunction detected by the Cyclomix
®
Evo stops the equipment concerned. Each fault is indicated on the screen.
After each fault, the operator must reset the installation and acknowledge the fault..
Gain
Parameter defined in the recipe parameters. It is used to define the opening frequency of the injection valves for
products B and C. The higher this value, the faster the opening frequency. This value can be between 1 and 3000.
For information, a value of 125 corresponds to a valve opening of 0.8 seconds.
Potlife
Refers to the length of time that a multi-component product can be applied after mixing between the different
components. .
The POTLIFE monitoring time (Lifetime) is a counter to measure the time of the product's non-circulation time.
Priming
Corresponds to the filling phase of the machine to have the product at the right ratio and well mixed before starting
the production.
Concerns the current recipe and the volume of the priming remaining before going into production mode.
Regeneration
Phase of product renewal inside the circuits of the dosing system.
The operation is equivalent to the production phase, i.e. the dosing principle is continued.
Summary of Contents for Cyclomix Evo
