SAMES KREMLIN
Page 4
Manual : 573.176.112
2- DESCRIPTION
DESCRIPTION OF THE REGULEX
SYSTEM
The REGULEX
system comprises of a control box, a REGULEX
shot meter and connecting cables.
The system is designed to precisely meter and dispense silicone, adhesives and other viscous materials
depending on the application
The system is normally mounted on a robot. The robot controller sends a signal to the REGULEX®
control box to provide the necessary outputs to the shot meter to dispense the programmed bead.
The main function of the REGULEX
System is to precisely control and regulate material dispensing.
The materials can be applied hot or cold depending on the application
1 - B6 REGULEX® control
unit with unit
2 - REGULEX
shot meter
3 - REGULEX
cable
(length : 10 m, 15-pins
connector)
4 - Motor cable
(length : 10 m, 4-pins
connector)
5 - Encoder cable
(length : 10 m, 6-pins
connector)
REGULEX
SYSTEM PRINCIPLE
The REGULEX
system is designed to accurately control “
Dispense bead management”
in relation to
commands from robotised systems
All communication between Robot and the REGULEX
control unit is regularly updated
This ensures that the shot meter is able to respond in the shortest possible time and give a constant
quality of bead.
