7
OPERATOR
’S
MANUAL
ROAD SHOULDER CUTTER
RP 110
❑
Do not operate after dusk.
❑
Do not leave the tractor-arm system on slopes without additional protection.
❑
Do not operate with damaged or missing guards.
Inspection and repair
❑
Perform any inspection, repair and maintenance works as well as cleaning parts or assemblies
when the drive is switched off and there is no pressure in the hydraulics, having taken the ignition
key off and set the aggregation of tractor and machine in a standstill position.
❑
Inspect bolts and other fasteners regularly. Do not operate with damaged or worn fasteners.
❑
Replace damaged or worn (aged 5 years or older) hydraulic hoses and other hydraulic parts as
recommended by the Manufacturer.
❑
Do not perform any repair works underneath the lifted machine
’
s assemblies, unless protected
against free falling.
❑
Check the condition of the cutting blades before each operation. If they are blunt, return them for
renovation. Replace if damaged or worn.
❑
Use only original spare parts ordered at our store or at your dealer.
❑
During operation, maintenance and adjustment, always wear protective gloves, shoes and clothing
without loose elements, belts, etc. Always respect warnings on safety labels attached to the
machine.
❑
When operating the hydraulics, always wear protective eyewear and gloves. Hydraulic oil leaking
under pressure (20 MPa) may penetrate the skin and cause its irritation thereafter. In such case,
visit a doctor immediately.
❑
In the event of a serious failure, please call for technical service, and if an accident (in this case:
road accident) occurs, respect first aid rules and contact responsible authorities.
Storage
❑
Machine should be stored under a roof and protected against access of animals and unauthorised
persons who could get injured.
Transport
❑
Both the driver and the carrier are responsible for the cutter's safe transport. Any equipment and
parts must be secured for transport.
❑
Handle with the lifting devices only by attaching to rigid elements of the road shoulder cutter, such
as the support frame and the mounting plate.
❑
Use the lifting devices and accessories with a lifting capacity greater than the weight of the road
shoulder cutter indicated on the nameplate.
❑
Secure the road shoulder cutter on the vehicle load bed in such a way as to prevent its movement.
WARNING!
The person in charge of the machine's transport shall be responsible for
securing the danger area and performing the work.
