23
OPERATOR
’S
MANUAL
ROAD SHOULDER CUTTER
RP 110
8.
The parts of the road shoulder cutter which are not subject to warranty due to natural wear
and tear during operation:
a)
cutting blades,
b)
worm shaft,
c)
hydraulic motor,
d)
transmission,
e)
gearboxes and parts inside the gearboxes,
f)
sleeves and sliding parts,
g)
joints,
h)
flail-type blades,
i)
V-belts,
j)
bearings,
k)
sliding skids, etc.
9.
The guarantor has the right to cancel the product warranty if the following are discovered:
a)
changes in the design or intentional damage,
b)
extensive damage caused by a random event or other events for which the guarantor is
not liable,
c)
lack of required records, stamps, or their fabrication in the warranty card,
d)
using the machine contrary to its intended purpose or instruction manual.
10.
Manufacturer can break the service agreement with immediate effect when the user do not pay
receivables according to that agreement in a timely manner and the delay in payment is longer
than 30 days from maturity date. Breaking the service agreement caused by the user makes
simultaneous breaching of the warranty.
11.
Manufacturer does not take compensation responsibility for the loss caused by breakdown of the
machine during work.
CAUTION:
Please ask your dealer to fill the warranty card with proper dates, stamps and
signature when purchasing. Lack of this important information may cause
cancel of warranty.
CAUTION:
The warranty card is valid only when there are the following information:
address, date and place of purchase, tree stump grinder type and invoice
number.
CAUTION:
Every after-warranty repair can be done against payment by the repair shops
authorised by the dealer. Authorisation is a duty of your dealer.
CAUTION:
The manufacturer reserves the right to alter technical design and specification
without prior notice and without liability.
