background image

 

12 

P10-1200 

TRAILED ROTARY TEDDER 

OPERATOR’S MANUAL

 

 

When using hydraulic hoses: 

 

Avoid stretching the hoses when operating. 

 

Do not allow hydraulic hoses to get deflected. 

 

Do not expose hydraulic hoses to contact with any sharp edges. 

 

If damaged or worn, replace the hoses with new ones. 

 

Useful life for hydraulic hoses is 5 years from their production date. 
 

4.8.

 

Residual risk 

Despite the fact, that company SaMASZ 

 the manufacturer of the tedder takes the responsibility for 

design and manufacturing of the tedder, in order to eliminate dangerous situations, certain risk during 
tedder operation is unavoidable. 

1. Danger of catching 

This kind of risk occurs during changing the position of a tedder, operation near rotating parts, working 
without safety guards. During operation, maintenance and regulations always wear protective gloves, 
shoes and clothes without loose parts, belts and so on. Always comply with safety decals placed on 
the tedder. 

2. Danger of injury, abrasion and damage of skin 

This kind of risk occurs during replacement of working parts with sharp edges, cleaning the machine 
and removal of any clogging and seizure. During any maintenance work always use safety gloves. 

 

3. Danger of liquid ejection out of hydraulic system 

During connection of hydraulic hoses to hydraulic connectors make sure, that either tractor’s or tedder’s 

hydraulic system is without pressure. 
During  operation  of  hydraulic  system  always  wear  protective  glasses  and  gloves.  Check  regularly 
hydraulic hoses. 

 

WARNING!

 

Residual risk always results from incorrect behaviour of tedder’s operator.

 

 

4. Bans 

Please bea

r in mind the following bans during tedder’s operation:

 

 

never unblock the tedder, make any regulations or repairs while the tedder is in motion, 

 

never change the order of operation and maintenance activities described in operator’s manual,

 

 

never operate the tedder when it is not in working order or has damaged safety guards, 

 

never get your hands and legs close to rotating parts of the tedder, 

 

during  repair  and  maintenance  of  the  tedder  always  comply  with  the  descriptions  included  in 

operator’s manual. Always do these activities when the tractor’s drive is off,

 

 

before you start any activities, focus your attention on them, 

 

never operate the tedder under the influence of alcohol, drugs, or strong medicines 

 

your  clothes  should  not  be  too  loose,  or  too  tight.  Too  loose  cloth  parts  may  be  pulled  in  by 
the rotating parts of the tedder. 

 

the tedder cannot be operated by children or by handicapped people. 

Summary of Contents for P10-1200









































Reviews: