Operating manual
Rear disc mowers with central suspension
- with hydro-pneumatic or spring suspension
- 3 1 -
WARNING:
Transporting the mower in the transport position shown in the above picture can be
done only for short periods on level roads and at very low speed. Not observing of this
warning can cause damage to the actuator responsible for rotating the mower and thus
become dangerous during operation.
ATTENTION:
If the purchaser of the mower does not own the safety equipment mentioned
above it can be purchased from the mower's manufacturer.
WARNING:
Be especially cautious around telephone and power lines when the transporting
height exceeds 4 m. This concerns the KT 340 H mower – the height should be
reduced on the hitch of the tractor.
•
the sign designating slow moving vehicles (part of standard tractor equipment) should be
moved from the tractor to the receptacle on the cover of the mower's belt drive.
ATTENTION:
If it is necessary reduce the length of the shaft according to its user's manual.
WARNING:
The articulated telescopic shaft should remain connected only during mower
operation. During transport or any servicing operations the shaft should be
disconnected from the PTO of the tractor.
ATTENTION:
Operate machinery only with the articulated telescopic shafts designated for use
with that machinery. Before starting work check if all the covers (tractor,
machinery and shaft) are in place and functioning. Damage or lost elements
must be replaced with original spares. Check weather the articulated telescopic
shaft is properly installed. Never get close to rotating parts it could result in
injury or death. During servicing of the shaft or the machine the engine and
the power take-off of the tractor must be turned off. Before operating any
machinery carefully read the operating manuals of the shaft and the machine.
