Operator’s manual
Front disc mowers
KDF
- 7 -
Drive from tractor’s rpm is transmitted through PTO shaft, intersecting axis gear I (4),
cutterbar drive shaft (6) and intersecting axis gear II (5) to the cutterbar (3). On the cutterbar there
are discs with two knives each. The extreme discs have additional forming drums. Apart from that,
drive from tractor’s rpm through intersecting axis gear I (4), tine conditioner driver shaft (12) and
gearbox (13) is transmitted to tine conditioner (11). Cutterbar is connected to the main frame (2)
along with suspension frame (1). On the suspension frame there is mower’s triangle, which is
designed to connect the mower to tractor’s front 3-point linkage. Over the cutterbar there are safety
guards (10).
Fig. 3c. Parts of SaMASZ front disc mower with roller conditioner
1 – Suspension frame
2 – Main frame
3 – Cutterbar
4 – Intersecting axis gear I
5 – Intersecting axis gear II
6 – Cutterbar drive shaft
7 – Swath guide
8 – Support springs
9 – Hydraulic cylinders
10 – Safety guard
11 – Roller conditioner
12 – Roller conditioner drive shaft
13 – Gearbox
Drive from tractor’s rpm is transmitted through PTO shaft, intersecting axis gear I (4),
cutterbar drive shaft (6) and intersecting axis gear II (5) to the cutterbar (3). On the cutterbar there
are discs with two knives each. The extreme discs have additional forming drums. Apart from that,
drive from tractor’s rpm through intersecting axis gear I (4), roller conditioner driver shaft (12) and
gearbox (13) is transmitted to roller conditioner (11). Cutterbar is connected to the main frame (2)
along with suspension frame (1). On the suspension frame there is mower’s triangle, which is
designed to connect the mower to tractor’s front 3-point linkage. Over the cutterbar there are safety
guards (10).
3.3.
Standard equipment and spare parts
The mowers are sold with the following standard equipment:
warranty card,
operator’s manual along with spare parts list,
cutting knives: additional set,
holders for warning plate and lights,
PTO shaft with friction clutch,
tractor’s triangle,
spray paint (150 ml).
10
1
6
5
3
11
8
2
13
12