SaMASZ KDF 260, Operator'S Manual, Page: 35 / 42

Operator’s manual
Front disc mowers
KDF
- 33 -
7. LUBRICATION
7.1. Cutterbar
Refilling the oil of the cutterbar is done through the inlet A (Fig. 29). Proper oil level is
5÷7 mm from the cutterbar bottom. In order to drain oil from the cutterbar dismount the cutterbar
enclosure by releasing bolts (B). The best time to drain the oil is immediately after the operation, if
still warm. Oil capacities are show in Tab. 8.
Fig. 29. Cutterbar oil inlet
Tab. 8. Oil capacities
Model Oil capacity [L] Oil type Lubrication frequency
KDF 260 – 2,6 m;
KDF 260 S/SL – 2,6 m
5,0
80W90
Once every 3 seasons
(if working intensively more
frequently)
KDF 300 – 3,0 m
KDF 300 S/SL/W – 3,0 m
KDF 301 S/SL – 3,0 m
6,0
KDF 340 - 3,4 m
KDF 340 S/SL/W – 3,4 m
KDF 341 S/SL/W – 3,4 m
6,5
KDF 390 – 3,9 m 7,0
7.2. Intersecting axis gears
Everyday before starting work please check the oil level and, if needed, please refill after
having removed the vent A on the top of the gear (Fig. 30). The oil level can be checked through
the check opening B on the side of the gear. Please refill the oil until it is visible in the check
opening B. The oil capacity: about 1 l.
Tab. 9. Oil capacity
Model Oil capacity [l] Oil type Lubrication frequency
All models about 1 (SAE 80W/90, API GL-4)
Once every 3 seasons
(if working intensively)
Fig. 30. Intersecting axis gear lubrication point
B
A
A
A
B