Sam4s SPS-1000, Programming Manual

Page: 68 / 285

62

S-Mode Programming SPS 1000 Program Manual
System Password
The system password allows service access to all of the functions of the SPS 1000 . For
example, use the system password:

If you are servicing a users system and you do not know an employee code
that allow you to access necessary functions.

If authority level programming prohibits you from accessing functions you
need to access in order to complete your tasks.
Sign the system password to allow access to all SPS 1000 functions (except register mode
operations.) After you have completed your session, the system password must be signed off
through normal sign off procedures before another employee may be signed on.
If you wish to block system password access, program 0000 in the system password
field.
1. Select SYSTEM
PASSWORD from
the S-MODE MENU
to set the system
password.
2. Enter a 4-digit
password, if desired.
3. Press ENTER to
return to the S-
MODE MENU.
SYSTEM PASSWORD
SYSTEM PASSWORD (0000=NO PASSWORD)
9999
ESC ENTER