background image

156 

 P-Mode Programming 

SPS 1000 Program Manual 

Logo Message 

 

LOGO MESSAGE PROGRAMMING            
 

JUSTIFY:                        CENTER

 

 
PREAMBLE #1: 
 
PREAMBLE #2: 
 
PREAMBLE #3: 
 
PREAMBLE #4: 
 
PREAMBLE #5: 
 
 

        ESC Y/N ENTER PAGE UP/DN 



 

 

LOGO MESSAGE PROGRAMMING           ALPHA 
 
POSTAMBLE #1: 
 
POSTAMBLE #2: 
 
POSTAMBLE #3: 
 
POSTAMBLE #4: 
 
POSTAMBLE #5: 
 
 
 
 

        ESC Y/N ENTER PAGE UP/DN 



 

1.

 

Choose LOGO 
MESSAGE to display 
the LOGO 
MESSAGE 
PROGRAMMING 
screen.  

2.

 

Set the JUSTIFY 
option to center, left 
or right justify your 
message. 

3.

 

Type the preamble 
message in the space 
provided, up to 40 
characters per line.  
Press the 

 

 

 

 

keys to move the 
cursor to a new 
position.  

4.

 

Press 

PAGE DN

 to 

program the logo 
postamble.  Type the 
message in the space 
provided.  Up to 40 
characters per line.  
Press the 

 

 

 

 

keys to move the 
cursor to a new 
position.  

5.

 

Press 

ESC 

to exit the 

screen and return to 
the MESSAGES 
MENU screen.   

 

 

Summary of Contents for SPS-1000






























































































































































































































































































Reviews: