Sam4s SPS-1000, Programming Manual

Page: 52 / 285

46

S-Mode Programming SPS 1000 Program Manual
WLU Key Relocation
This process accomplishes two purposes:

It changes the assignment of a key location to a WLU key. You can change an
existing Function key or PLU key into a WLU key by selecting any key on the
keyboard in this program.

It assigns the WLU number that is displayed when this WLU key is operated.
The WLU # assignment for a WLU key can also be set in P-Mode. See “PLU
and WLU Key Assignment” in “P-Mode Programming”.
1. Press any key to read
and/or change the
current assignment, or
press
ESC to exit.
WLU KEY RELOCATION PROGRAMMING
KEYBOARD LEVEL 1

PRESS ANY KEY TO READ AND/OR CHANGE
CURRENT ASSIGNMENT
OR

PRESS ESC TO EXIT
2. Type the WLU
number you wish to
be displayed when
this WLU key is
pressed. Press
ENTER to assign the
number, or press ESC
to exit without
changing the current
assignment.
WLU KEY RELOCATION PROGRAMMING
KEYBOARD LEVEL : 1 KEY POSITION : 1
CURRENT WLU#:
01
KEYCODE#013 ADD CHECK
ESC ENTER
The current function and
descriptor for this key are
displayed here.