Sam4s SPS-1000, Programming Manual

Page: 45 / 285

SPS 1000 Program Manual S-Mode Programming

39
Memory Allocation Program Notes
FIELD Notes
1 # OF DIGITS IN REPORT
TOTALS (8-10)
Determine the maximum size of report totals:
8, 9 or 10 digits.
2 # OF DIGITS IN REPORT
COUNTERS (6-8)
Your choice assumes two digits to the right of
the decimal. For example 6 digits =
XXXX.XX or 7 digits = XXXXX.XX.
3 # OF PLU
Determine the total # of PLUs, including
PLUs by code, by scanning or by
keyboard/keyboard level.
4 # OF PLU STATUS GROUPS
Determine the maximum number of status
groups to which you link PLUs. See "PLU
Status Group (PLU Status Link)" in "P-Mode
Programming" for more information.
5 # OF PRICE LEVELS PER
PLU (1-5)
Prices may be assigned at up to five different
price levels for each PLU. If you wish to use
price levels, you must determine the number
of price levels here. If Price levels are set,
they are set for all PLUs.
6 PLU REPORT BY PRICE
LEVEL
If selected, the PLU report will detail sales at
each level, rather than a total and counter for
sales at all levels combined.
7 # OF EMPLOYEES
Determine the total number of employees and
set the maximum use wish to use here.
Employees include all who use the register for
any purpose, including those using only the
time clock feature for clocking in/out.
8 # OF TIME ENTRIES PER
EMPLOYEE
Determine the maximum number of clock
entries that can be stored in the Z1 report.
After Z1, only summaries are stored on Z2
reports (or Z3, Z4 or Z5 reports, if
implemented.)
9 USE GROUP BY EMPLOYEE
Determine if you wish to report GROUPS by
EMPLOYEE. If you choose Y, then you can
report up to 30 of the 99 groups for each
employee. See "Groups By Employee" on
page 245 to select which groups will report
for each employee.
10 CHECK TRACKING METHOD
Choose HARD or SOFT. Hard checks store
only the check balances; soft check store
check detail for the number of lines
determined at step 12.