Sam4s SAP-6600 Manual Download Page 65

Page: 65 / 271

Sam4POS 6600/4800II Program Manual v2.1

Program Mode

•

INPUT NAME →

STOCK

quantity →

PLU Code

for the new item.

Press

to add the new item; Press

OK AND CONTINUE

to add the item and continue adding

more PLUs; Press

CANCEL

to cancel the new PLU entry.

Copy to Existing Items

Allows you to copy the settings or changes of the selected item to multiple items already in the PLU

database. The descriptor does not change, only the options/settings are updated.

Check the items from the list to copy the selected PLU to.

The double Up/Down Arrows

go to the Beginning/End respectively; the single Up/Down

Arrows

scroll Up/Down one page at a time. Pressing the

will exit the operation.

Summary of Contents for SAP-6600
















































































































































































































































































Search results

Summary of Contents for SAP-6600

Reviews:

Related manuals for SAP-6600

Brands by name

Popular brands

Sam4s SAP-6600, Manual

Search results

Summary of Contents for SAP-6600

Reviews:

Related manuals for SAP-6600

Brands by name

Popular brands