Sam4s SAP-6600 Manual Download Page 14

Page: 14 / 271

•

Sam4POS 6600/4800II Program Manual v2.1

Contents

Introduction

4s S

4POS Overview

4POS from S

4s is an Android based POS solution installed on the S

4s SAP-6600,

SAP4800II or SAP-530 Android terminals and the Hisense HM616 Android tablet. S

4POS is

available to resellers only as a hardware/software bundle; S

4POS is not available as a generic

application and will not run on other Android devices.

The S

4POS application will automatically boot on power-up, and other Android applications or

desktop functions are not available to the user without authorization.

Within a network, devices can have different settings and programs.

This manual is specific to the SAP-6600 and SAP-4800II terminals. A separate manual is available

for the Sam4POS application with the SAP-530 terminal.

Hardware

SAP-6600

The SAM4s SAP-6600 touch screen terminal is an attractive, powerful and cost-effective Android touch

screen terminal that will effectively run a variety of Android software applications.

Summary of Contents for SAP-6600
















































































































































































































































































Search results

Summary of Contents for SAP-6600

Reviews:

Related manuals for SAP-6600

Brands by name

Popular brands

Sam4s SAP-6600, Manual

Search results

Summary of Contents for SAP-6600

Reviews:

Related manuals for SAP-6600

Brands by name

Popular brands