Sam4s SAP-6600 Manual Download

Page: 182 / 271

180

•

Program Mode

Sam4POS 6600/4800II Program Manual v2.1

FLU Edit Screen Sections

FLU Selection Pane

FLU Key Assignment Pane; up to 14 keys can be assigned.

Edit/Design Item Attributes

FLU Selection Pane

You can add new FLU’s or select an existing FLU to edit from this section. The FLU screens provide

up to 14 single keys which can have functions, tenders, Macro’s or MLU keys assigned.

Add New FLU Screens

Touch the

icon to add a new FLU.

Enter a Description (up to 30 characters) for the new FLU; (

i.e. DISCOUNTS

); check the

‘

MANAGER REQUIRED?’

option if reserved for manger use only.

Press

to add the new FLU or press OK AND CONTINUE to add additional FLU’s. Pressing

CANCEL will exit without adding any FLU’s.

Summary of Contents for SAP-6600
















































































































































































































































































Search results

Summary of Contents for SAP-6600

Reviews:

Related manuals for SAP-6600

Brands by name

Popular brands

Sam4s SAP-6600, Manual

Search results

Summary of Contents for SAP-6600

Reviews:

Related manuals for SAP-6600

Brands by name

Popular brands