Sam4s SAP-6600 Manual Download Page 21

Page: 21 / 271

Sam4POS 6600/4800II Program Manual v2.1

Introduction

•

➢

You can enter the system Manager Password

➢

You can enter the operating code of any employee that has the ADMIN

USER option checked.

➢

If an employee card system is used, employees with manager status can

swipe their card to complete the transaction.

Initial Clear

The initial clear function allows you to exit any register activity and return to a beginning or cleared

state. No program data is lost by performing this operation.

In versions 1.0.26 and later: Tap the

Version

information, in the lower right corner, three times to initial

clear the S

4POS terminal.

(In versions before 1.0.26: tap the S

4s logo displayed on the main sign

on screen three times.)

Press

YES

to proceed with the initial clear; or press NO to exit without the initial clear.

Sign on to the S

4POS as normally.

The Notification dialog displays:

Summary of Contents for SAP-6600
















































































































































































































































































Search results

Summary of Contents for SAP-6600

Reviews:

Related manuals for SAP-6600

Brands by name

Popular brands

Sam4s SAP-6600, Manual

Search results

Summary of Contents for SAP-6600

Reviews:

Related manuals for SAP-6600

Brands by name

Popular brands