Sam4s NR-300 Series, Operator'S Manual

Page: 30 / 176

30
•
Operations SAM4s NR-300 Series Operator's & Programming Manual v.1.0
Clerk Sign-On/Sign-Off
See "System Option Programming” to review your clerk options: (System option #2 allows
you to select direct or code entry sign on, option #3 allows you to select stay-down or pop-up
operation, and option #26 allows you select clerk interrupt operations.)
Depending on how your register has been programmed, sign-on will take place only at the
beginning of a shift (stay-down), or may have to be repeated for each transaction (pop-up).
Normally, if your register has been programmed for stay-down clerks, the clerk currently
signed on must be signed off before another clerk may be signed on. If you have selected the
clerk interrupt option, a new clerk can be signed on in the middle of a transaction. In this
circumstance, the initial transaction is suspended. When the interrupt transaction is
completed, the suspended transaction can be continued.
Check with your store manager to see which options have been selected for your register.
Before any transaction may take place, a clerk must be signed on. Clerk sign-on is
accomplished in one of two ways:
Direct Sign-On
If the direct sign-on method is selected, enter the
clerk number and press the clerk key.
To sign the clerk off, enter 0 (Zero) and press the
clerk key.
01/20/2014 MON
08:37
================================
CLERK LOG IN
================================
CLERK 1
000001 00001
01/20/2014 MON
08:37
================================
CLERK LOG OUT
================================
CLERK 1
000001 00001
CLERK
Clerk # (1-10)
0 CLERK