Sam4s NR-300 Series, Operator'S Manual

Page: 105 / 176

SAM4s NR-300 Series Operator's & Programming Manual v.1.0
•
105
Tax Programming
The NR-300 Series has the capability to support four separate taxes.
Taxes can be calculated as either a straight percentage rate of between .001% and 99.999%, or a 60 break
point tax table. Each tax may be either an add-on tax (added to the cost of a taxable item), or a value added
tax (VAT) that is included in the price of the item.
Tax rate 4 may be set to function as the Canadian Goods & Services Tax (GST). Definitions for tax rates 1, 2,
3 & 4 are made as part of tax programming.

If you are entering a tax rate (add-on or VAT), see "Straight Percentage Tax Rate
Programming" to enter the percentage rate.

If you are entering a tax table, see “Tax Table Programming” to enter the tax break
points.

If you are entering a Canadian Goods and Services Tax (GST), use tax rate 4 for the
GST tax, and use tax rates 1, 2 and/or 3 for any other provincial tax or taxes. See
"Straight Percentage Tax Rate Programming" to enter the GST status and percentage
rate.
Important Note: After you have entered your tax program(s), test for accuracy by
entering several transactions of different dollar amounts. Carefully check to make sure
the tax charged by the cash register matches the tax on the printed tax chart for your
area. As a merchant, you are responsible for accurate tax collection. If the cash
register is not calculating tax accurately, contact your dealer for assistance.
Descriptor
-
Refer to “ Function Key Descriptor”
Tax Programming
Enter CASH key
Enter CASH key
* Description Program
- If you not change the description, Enter only CASH key.
PROGRAM MODE
2. SALES TAX →
SALES TAX
0. TAX 1
TAX1
TAX1
TAX1 ADD-ON
ADD- ON →