Sam4s NR-300 Series, Operator'S Manual

Page: 93 / 176

SAM4s NR-300 Series Operator's & Programming Manual v.1.0
•
93
2. Press and hold the CASH and MODE keys. (Use the keys in their default
locations, the upper-right and lower-right keys on the keyboard.)
3. While continuing to hold the CASH and MODE keys, turn the power switch to
the ON position. ( SELECT DOWN MODE screen display and the error tone
will sound beep-beep-beep in quick succession.) Release the keys.
4.
Select this menu using the ‘ ↑ ’ or ‘ ↓ ’ key and press
CASH key.
5. Power the register OFF. The Flash ROM update is complete.
6. Remove the SD card from the register.
7. Perform a memory all clear on the ECR. The ECR is now ready to program or to
load a previously saved end-user program.
Flash ROM Update by PC
Update Files
To complete the firmware update, you will be supplied with the following files:

NEWNET_DOWN.exe (The update utility program)

NEWNET.bin
PC Connection Cable
YOU MUST USE Port #1 . Use the following cable:

Part # 522120 (Register DB-9MF COM 1 to PC DB-9F)
Update Boot Area
Update instructions included with the .bin file will tell whether both Boot Area and
Application Area updates are required. In most cases you may be instructed only to update
the Application Area.
1. At the NR-300, Press the Mode key to locate mode indicator bar on the S
position
2.
Select this menu using the ‘ ↑ ’ or ‘ ↓ ’ key and press
CASH key.
SELECT DOWN MODE
2. SD CARD →
CASH
DOWNLOAD MODE
DOWNLOADING
(100%)