SAM4s NR-300 Series Operator's & Programming Manual v.1.0
Operations
•
29
RECD ACCT (1-3)
The RA (received on account) key is used to record media loaned
to the cash drawer, or payments received outside of a sale. The
cash drawer will open. The amount received adds to the cash-in-
drawer total.
SUBTOTAL
Displays subtotal of sale including tax. Must be pressed prior to
a sale discount or sale surcharge.
TAX EXEMPT
Press the
TAX EXEMPT
key to exempt tax 1, tax 2, tax 3,
and/or tax 4 from the entire sale.
TAX (1-4) SHIFT
When pressed before a PLU entry, the tax shift keys reverse the
tax status of the PLU, i.e., a PLU with non-tax status would
become taxable or a PLU with tax status would become non-
taxable.
VOID
Use to correct an item entered earlier within a sale. The
VOID
key corrects the appropriate totals and counters. To correct the
last item, use the
ERROR CORR
key. For void operations
outside of a sale (Transaction Void), use the VOID position on
the control lock. The Financial report records totals for each
type of void separately.
VALIDATION
If you are using an optional slip printer, you can press the
VALIDATION
key to print a three-line validation on a separate
form or piece of paper. Any item registration, discount or
payment may be validated
WASTE
Allows control of inventory by accounting for items that must be
removed from stock due to spoilage, breakage or mistakes. Press
the
WASTE
key before entering wasted items, and then press the
WASTE
key again to finalize. The
WASTE
key may be under
manager control, requiring the mode to be in the X position. The
WASTE
key is not allowed within a sale.
MODE
Use to change current mode. There are two methods.
1.
Just press the mode key. The mode will be changed
sequentially.
2.
Press a specific number and the mode key.
(VOID:1, OFF:2, REG:3, X:4, Z:5, P:6, S:7)
Example) 5 + mode key => The mode will be changed to Z mode.
Additionally you can control the back-light by using this key.
*100 + MODE key =>
Turning on or off the back-light. (It will be
toggled)
Summary of Contents for NR-300 Series
