Sam4s ER-180T, Operator'S And Programming Manual

Page: 81 / 89

SAM4s ER-180T Operator's & Programming Manual v1.4 Service Mode Programming

81
Service Mode Programming
Clear Totals
Use this function to clear all totals and counters including the grand total. Programming will
not be cleared.
1. Turn the control lock to the S position.
2. Enter 20 , and then press the SUBTOTAL key.
0 SUBTOTAL 2
3. The message “ALL TOTAL CLEAR” prints.
Clear Grand Total
The register mbe be cleared (Z Financial/Dept Report) before the grand total can be cleared.
1. Turn the control lock to the S position.
2. Enter 20 , and then press the SUBTOTAL key.
0 SUBTOTAL 3
3. The message “GRAND TOTAL CLEAR” prints.
EPROM Information
To read the current EPROM version:
1. Turn the control lock to the S position.
2. Enter 50 , and then press the SUBTOTAL key.
0 SUBTOTAL 5
3. The display will show a series of equal signs, the version, checksum and EPROM date
will print, and then the display will clear.