50
Program Mode Programming
SAM4s ER-180T Operator's & Programming Manual v1.4
Tax Table Programming
See “
Tax Percentage Rate Programming
” on page 19 to set a simple tax percentage
.
In some cases, a tax that is entered as a percentage does not follow exactly the tax charts that
apply in your area (even if the tax chart is based on a percentage). In these cases, we
recommend that you enter your tax using tax table programming. This method will match tax
collection exactly to the break points of your tax table.
Before programming, obtain a copy of the tax table you wish to program. You will need the
printed tax table if you wish to determine the break point entries yourself.
Note: You can enter up to 60 break points.
Determining Break Point Entries
1.
Examine the printed tax table for the tax you are programming.
2.
Refer to the “Tax Table Programming Example - Illinois 6% Tax Table” to help
with this exercise.
3.
Calculate the break point differences by subtracting the high side of the previous
range from the high side of the dollar range.
4.
Examine the pattern of break point differences to determine when the break
points begin to repeat. Mark the beginning break points that do not fit a pattern
as “non-repeat breaks.” Mark the break points that are repeating in a pattern as
“repeat breaks.”
Programming a Tax Table
1.
Turn the control lock to the
PGM
position.
2.
Enter
10
.
3.
Enter a digit to represent the tax you are programming:
1
for TAX 1
2
for TAX 2
3
for TAX 3
4
for TAX 4
4.
Press the
TAX
key.
5.
Enter the maximum amount that is not taxed and press the appropriate
TAX
key.
6.
Enter the first tax amount charged and press the appropriate
TAX
key.
7.
For each non-repeat break point, up to the last non-repeat break point, enter the
high side from the sale dollar range and press the appropriate
TAX
key.
8.
For the last non-repeat break point, enter the high side from the sale dollar range
and press the
X/TIME
key.
9.
For each repeat break point, enter the high side from the sale dollar range and
press the appropriate
TAX
key.
10.
Press the
CASH/TEND
key to end the tax table program.
Summary of Contents for ER-180T
Page 8: ...8 Contents SAM4s ER 180T Operator s Programming Manual v1 4...
Page 22: ...22 Quick Program Guide SAM4s ER 180T Operator s Programming Manual v1 4...
Page 80: ...80 Program Mode Programming SAM4s ER 180T Operator s Programming Manual v1 4...
Page 82: ...82 Service Mode Programming SAM4s ER 180T Operator s Programming Manual v1 4...
