Sam4s ER-180T, Operator'S And Programming Manual

Page: 59 / 89

SAM4s ER-180T Operator's & Programming Manual v1.4 Program Mode Programming

59
Program 100 - PLU Status Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 1 0 0 , press the SBTL key.
0 SUBTOTAL 0 1
3. Select the PLU or PLUs you wish to program in one of the following ways:

Enter the PLU number (1-500) and press the PLU key, or
PLU
Enter the PLU#,
(1-500)

Enter the number of the first PLU in a range of PLUs that are to receive the
same setting; press the
PLU key. Enter the last number in the range; press
the PLU key.
PLU
Enter the PLU#,
(1-500)
Enter the PLU#,
(1-500)
PLU
4. Refer to the "PLU” Status Chart" to determine the values for N1 through N8 .
Enter the values you have selected, press the X/TIME key. (You do not need to
enter preceding zeros.)
N3 N2 N1 N4 N5
X/TIME
(X)
N6 N7 N8
5. To program additional PLUs, repeat from step 3, or press the CASH/TEND
key to finalize the program.
CASH/TEND
(=)
PLU Status Chart
Address Program Option Value
N1
PLU is negative item Yes = 1
No = 0
N2
PLU is single item Yes = 1
No = 0
N3
PLU is taxable by rate 4? Yes = 1
No = 0
N4
PLU is taxable by rate 3? Yes = 1
No = 0
N5
PLU is taxable by rate 2? Yes = 1
No = 0
N6
PLU is taxable by rate 1? Yes = 1
No = 0
N7
PLU is override preset ? Yes = 1
No = 0
N8
PLU is preset? Yes = 1
No = 0