Sam4s ER-180T, Operator'S And Programming Manual

Page: 16 / 89

16

Getting Started SAM4s ER-180T Operator's & Programming Manual v1.4
Initial Clear
CAUTION: Do not share this information with unauthorized users. Distribute the C
key only to those you may want to perform this function.
The initial clear function allows you to exit any register activity and return to a beginning or
cleared state. Any transaction that is in progress will be exited and totals for that transaction
will not be updated.
Here are some reasons you may want to perform an initial clear:

The register is in an unknown state, and you wish to exit the current program or
transaction without following normal procedures.

An initial clear may be necessary as part of servicing, or troubleshooting.
To Perform an Initial Clear:
1. Unplug the ECR.
2. Turn the control lock to the PGM position.
3. Press and hold the key position where the SUBTOTAL key is located on the
default keyboard layout.
4. Continue to hold the SUBTOTAL key and turn the power switch ON .
5. The message “****** INITIAL CLEAR ******” prints when the initial clear is
complete.
This procedure will not affect register programming, or clear previously stored totals in ECR
memory.