Sam Cook MASTERCHEF EXECUTIVE PSC-50, User Manual

Page: 23 / 35

EN
22
� Store the appliance and its cord
out of reach of children under
8 years of age.
� Do not block the pulp and juice
outlet during operati on.
� Do not move the appliance du-
ring operati on.
� The appliance should be con-
nected into the socket with
grounding pin.
� The product should be placed
into the feeder opening during
operati on, do not fi ll the feeder
with fruits and vegetables at a
standsti ll.
� Be careful not to overload the
juicer, do not push the products
too hard through the feeder.
� Before use, check if the conta-
iner cover is securely fastened.
� Use the pusher only to push the
product.
� Do not immerse the drive in wa-
ter, do not wash under running
water.
� Do not load any hard materials,
large seeds, ice or frozen pro-
ducts into the feeder.
� Observe the following recom-
mendati ons for the nominal
operati ng ti me: juicing no more
than 20 minutes of conti nuous
operati on. Aft er completi ng
operati on cycle, wait 20 minutes
before restarti ng the appliance.
Compliance with the above will
prolong the life of the product.
� Prior to the processing, sugar-
cane should be peeled and cut
into pieces with dimensions of
20mm x 20mm. Porti ons should
be added successively aft er the
previous processing is fi nished.
� To avoid accidents during opera-
ti on, do not touch the bolt pin or
other removable parts with hand
or sharp tool, do not use other
objects to push the product.
� Do not plug the power cord
with wet hands.
� Do not remove the plug from
the mains by pulling by the cord.
� Do not use the appliance out-
doors.
� In order to ensure your childre-
n‘s safety, please keep all packa-
ging (plasti c bags, boxes, poly-
styrene etc.) out of their reach.
� WARNING! Do not allow small
children to play with the foil as
there is a danger of suff ocati on!
� WARNING! Do not use the
juicer if the extrusion sieve is
damaged.
EN
23
APPLIANCE OVERVIEW -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Motor unit/housing
2. Anti -slip feet
3. Power and control switch
4. Power indicator lamp
5. Carrying handle
6. Pulp bin (600 ml)
7. Juice pitcher (1000 ml)
8. Strainer
9. Filter bowl with juice spout and pulp
discharge chute
10. Sealing sleeve
11. Rubber stopper
12. Juice spout with closure
13. Pulp discharge chute
14. Stainless steel mesh fi lter baskets with
automati c cleaning module
A. Small mesh fi lter: for clear juice
B. Large mesh fi lter: for thick juice
15. Extracti on screw
16. Feeder chamber
17. Rotator feeder tube
18. Rotator lock
19. Pusher
20. Feeder tube lid
21. Cleaning brush
This appliance features a power and
control switch.
ON Turns on the appliance
OFF Turns off the appliance
REV Reverse rotati on: keep depressed to
use
BEFORE FIRST USE
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Remove the appliance from the box. Remo-
ve all packaging cardboard and fi lm pieces
from the appliance parts.
2. Thoroughly clean and dry the appliance,
especially all appliance parts with direct
contact with food products (See secti on:
CLEANING AND MAINTENANCE).
3. The Slow Juicer has a safety lock: the
appliance will only turn on if the feeder
chamber ⑯ is properly assembled.
SLOW JUICER ASSEMBLY
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
11
10
1
Place the rubber stopper ⑪ in the square hole under the fi lter bowl ⑨ . Place the sealing sleeve ⑩ in the fi lter
bowl ⑨ , if not assembled already.