Sam Cook MASTERCHEF EXECUTIVE PSC-50, User Manual

Page: 25 / 35

EN
24
B
A
2
Place the appliance on a smooth, stable and level surface. Install the fi lter bowl ⑨ on the motor unit ① by locati ng
the 3 bosses
B
on the housing top in the 3 grooves
A
on the fi lter bowl bott om ⑨ . The grooves
A
will match
the bosses
B
in a single specifi c alignment of the two parts.
3
Insert and adjust a stainless steel mesh fi lter basket (
14A
or
14B
) with the automati c cleaning module in the fi lter
bowl ⑨ so that the two tabs on the fi lter basket engages the fi lter bowl grooves ⑨ and the white marks on the
fi lter basket ⑭ and the 'open padlock' mark on the fi lter bowl ⑨ are aligned.
4
Place the extracti on screw ⑮ . In the fi lter basket ⑭ to be used.
EN
25
5
Place the feeder chamber ⑯ on the fi lter bowl ⑨ by aligning the bosses with the grooves in the bowl (the white
mark should be aligned with the 'open padlock' mark). Turn the feeder chamber ⑯ clockwise home so that the
safety lock tab in the feeder chamber ⑯ snaps into the recess in the motor unit ① (the white mark should be
aligned with the 'open padlock' mark). Proper engagement disables the safety lock which prevents using the
appliance when improperly assembled.
6
Place the pusher ⑲ in the feeder tube mouth ⑰ . Place the juice pitcher and the pulp container ⑦ and ⑥ under
the juice spout ⑫ and the pulp discharge chute ⑬ , respecti vely.
CAUTION! The Sam Cook Slow Juicer has an electric motor with a step-down gear. The appliance will need some ti me to fully process the food.
Work slowly. Do not feed too many pieces of fruits/vegetables. Do not push down the pusher too hard. Otherwise the appliance may stall.