Salvislab Thermocenter TC40/100 User Manual
- 6
Copyright© SalvisLab / Edition 30062016_2.0
1
General
1.1
Purpose of this document
This document describes the use of the newly developed warming cabinets and control regulation unit of
Renggli AG /Salvislab. Observation of the operating instructions can ensure safe, proper and economical use
of the device.
!
This manual contains information relevant to end customers. This document is not to be provided to
third parties without the permission of Renggli AG/Salvislab
1.2
Description
Warming cabinets are used for tempering of laboratory samples or other items in medical and general
laboratory environments.
1.3
Copyright
The copyright of this composition and all documents entrusted to the customer remains at all time with
Renggli AG/Salvislab. This document must not be provided to third parties or made available without the
written permission of Renggli AG.
1.4
Presentation of safety advice
The following symbols indicate safety tips and other general information:
!
Indicates a danger that may lead to physical injury or to irreversible loss of data.
i
Indicates additional information and tips.
2
Safety
2.1
Observe safety advice
Read all safety advice in this document carefully as well as all warning signs attached to the device. Pay
attention to the legibility of the warning signs and replace them immediately when they become damaged.
2.2
General safety advice
Check the device for operation safety before each use.
2.3
Intended use
Thermocenter units are not built to be used as ovens for drying substances which are explosive or release
explosive gases during the drying process. Any use other than the one the units are intended for is
forbidden.
The warming cabinet controller is built with state of the art technology and satisfies all recognized safety
regulations. Use this device only in the manner described in this manual. No guarantee can be made with
regard to the properties and safety of the device in the event of improper use.
