Salvislab Thermocenter TC40/100 User Manual
- 12
Copyright© SalvisLab / Edition 30062016_2.0
6
Getting started
6.1
Parts delivered
Your System will be delivered with the following parts:
•
1 Thermocenter unit
•
1 Shelf
•
1 Power cord
6.2
Install requirements
•
For your safety be sure your oven is installed properly by a qualified installer or service technician
•
This appliance must be supplied with the proper voltage and frequency. See rating plate located on the
back of the oven frame to determine the rating of the product
•
Leave at least 10 cm space between system and walls or benches
•
Max. 1 Thermocenter can be stuck on top (for stacking adapter see options list)
•
If you install a ducting to exhaust system then please contact your dealer for more information
6.3
Installing
•
Place shelf in appropriate position
•
Plug in the power cable
•
Close the door
•
Switch power on
•
Display shows Salvislab logo during boot
•
The device is ready for use when the SalvisTEQ Home menu appears on screen
•
For information on how to operate and navigate properly through the GUI, refer to chapters 9-16
SalvisTEQ Home Menu
6.4
Cleaning
•
Use mild detergents for cleaning oven surfaces (no acid/alcohol based or similar detergents)
•
Use microfiber cloths for cleaning the display
•
Never use abrasive cloths, paper towels, or tissue paper, which can scratch the touchscreen. If any
water at all is necessary, power off your device ahead of time
•
Never press too hard while cleaning the screen. This can damage the display
