Salva ST-02, Installation And Operating Instructions Manual

Page: 26 / 73

SALVA INDUSTRIAL, S.A
File: Horno Modular 02 (ing) 180711
4-6
4.2.6 Timed start-up.
Keys 4 (the waiting time flashes on and off), 5 and 6 enable you to select the time (in hours) to
transpire before the oven is switched on. Once the required number of hours has been selected,
press key 7 to initiate this operating mode.
All the oven elements will be switched off and the LCD screen will display only those details
corresponding to the time remaining until the oven is switched on.
If you wish to interrupt this operating mode, simply press key 7 once again.
The oven is not equipped with a real-time clock, which means that in the event of a power cut
occurring during the timed start-up operation, the start-up process will be delayed by the
same amount of time as the duration of the power cut.
This is displayed on the LCD screen, in the timed start-up zone.
4.2.7 User setting sequence:
Operating keys:
<7>
To leave the setting sequence.
<9>
To confirm selected values and advance to the following variable.
<8>
To return to the previous variable.
<5><6>
To modify the values shown for each variable.
Password:
<1> <1> <2> <2> <3> <3> <4> <4>
Once the above password has been entered, the following messages are shown:
“nid”
With this variable you can assign the oven’s identification number in the power control
applications. In a tower of modular ovens, the existence of two or more electronic panels with the
same identification number will mean that the power control cannot operate.
Possible values:
Minimum 1
Maximum 5
Standard 1