Salva ST-02, Installation And Operating Instructions Manual

Page: 23 / 73

SALVA INDUSTRIAL, S.A
File: Horno Modular 02 (ing) 180711
4-3
4.1 DETAILED DESCRIPTION OF CONTROL PANEL
a) Keys: The following list indicates the function of each key, according to the number on the corresponding
drawing.
<1> Pushbutton for selecting cooking temperatures.
<2> Pushbutton for selecting the power to be applied to the top, front or bottom elements. Each time
this button is pressed, the element for which the power is to be modified changes.
<3> Pushbutton for selecting the cooking time.
<4> Pushbutton for selecting the time required for a timed start-up.
<5> Pushbutton which increases the value of the figure flashing on and off.
<6> Pushbutton which decreases the value of the figure flashing on and off.
<7> Pushbutton which starts / stops the programmed cooking time.
<8> Pushbutton which enables a steam injection in ovens equipped with a stream generator.
<9> Pushbutton which connects / disconnects the steam elements.
<10> Pushbutton which connects / disconnects the control panel.
<11> Pushbutton which connects / disconnects the oven light.
b) LED indicators
<L1> Led which, when lit, indicates that a cooking operation is in progress.
When flashing, this light indicates that time has been added on to a finished cooking process.
<L2> Led which, when lit, indicates that steam is available.
<L3> Led which, when lit, indicates that the steam elements are connected.
<L4> Led which, when lit, indicates that the control panel is connected.
<L5> Led which, when lit, indicates that the oven light is connected.
c) LCD Screen: This screen displays information regarding the status of the oven control elements.
•
TEMPERATURE CONTROL ZONE:
Displays the real oven temperature (larger digits) and the programmed temperature (smaller digits), and
indicates the unit of measurement (ºC or ºF) and whether or not the real temperature corresponds to the
programmed one (depending on whether or not the thermometer is activated).
•
COOKING TIME CONTROL ZONE:
Displays the time remaining until the end of the cooking process (larger digits) and the programmed time
(smaller digits).
•
POWER SETTING ZONE:
Displays the profile of the oven, the status of the elements in each of the zones (top, front and bottom)
and the power setting assigned to each of them.
•
STEAM ZONE:
Tells the user that the steam electrovalve is connected and displays the seconds remaining until it is
disconnected.
•
POWER CONTROL ZONE
This zone is activated when the oven is working with power control.
•
TIMED START-UP ZONE
Displays the time remaining until the oven is switched on, expressed in hours and minutes.