Tel: 886.909 602 109 Email: [email protected]
23
2) When VFD display screen shows the item
Menu Config
, press the key ▼ twice to select the item
List Set
,
press the key
to confirm.
3) When VFD display screen shows the item
Load ListFile
, Press the key ▼ twice, select the item
Edit File
Format
, press the key
to confirm.
4) When VFD display screen shows
8*25 Steps
, Press the key ▼, select a list mode you want from
1*200
Steps,2*100 Steps, 4*50 Steps
, press the key
to confirm.
1*200 steps means to set list file as 1X200 step
2*100 steps means to set list file as 2X100 step
4X50 steps means to set list file as 4X50 step
8X25 steps means to set list file as 8X25 step
5) Press ▼ to select the item
Edit List File,
press the key
to confirm.
6) When VFD display screen show the item
Edit List File 1
, press the key ▲ and ▼ to select sequential
number you want to edit, press the key
to confirm.
7) When VFD display screen show the item List x Steps= xxx, press numberic keys to set the total list steps.
Press the key
to confirm.
8) When VFD display screen show the item
List File x Loop Mode
, press the key ▲ and ▼ to select
operation mode:
Continuous
means to start from the first step to the last step, stop the exsiting executing until next trigger
Loop Mode
means to looping execute list file
Step Mode
means excute one stpe after the trigger
9) When VFD display screen show the item
Step 1 Time= xxxxx mS
, press numberic keys to set time for step
1, press the key
to confirm.
10) When VFD display screen show the item
Step 1 Volt= xxxxx V
, press numberic keys to set voltage for step
1, press the key
to confirm.
11) When VFD display screen show the item
Step 1 Curr= xxxxx A
, press numberic keys to set current for
step 1, press the key
to confirm.
12) Repeat step 9, 10, 11 to complete all steps in list file
13) Repeat step 5 to 15 to edit other list files if needed
14) Press ▼ to select
Load ListFile
, press the key
to confirm.
15) Press the key ▲ and ▼ to select sequential number you want to load, press the key
to confirm.
The instrument is in the List mode. The VFD display screen shows OFF in the right when output is on.
VFD display screen shows List1 in the right when output is off. Press the key
On/Off
to execute. Press key
Shift+2
or
Esc
to exit. Press key
Shift+2
direct to excute the last list file.
16) Under loop mode, the instrument looping executes automatically. Please find the following table at
