Tel: 886.909 602 109 Email: [email protected]
20
Remote Sense:
set the remote sense mode
Curr Unit:
set the unit of current
Match Power:
set the matching power
50 HZ(Default)
Match 50HZ
60 HZ
Match 60HZ
Baudrate Set:
set the baud rate
4800
Setting the baudrate as 4800bps
9600(Default)
Setting the baudrate as 9600bps
19200
Setting the baudrate as 19200bps
38400
Setting the baudrate as 38400bps
Comm. Parity:
set the communication parity
None(Default)
Setting no parity bit
Even
Setting comm. parity as even parity bit
Odd
Setting comm. parity as odd parity bit
Key Lock Set:
set the key lock and password function
Password=
When set the password as 0 or pressing the key
Enter
directly, the
Key Lock Set
is disable.
When the
Key Lock Set
is enable, the
Key Lock
Set
get locked if no keyboard operation within 60
seconds, the
Key Lock Set
gets enable only if
you input the correct password.
Exit:
exit from the current menu
When accessing to
System Set
item,the following menu items will be displayed on the VFD display screen by
pressing the keys ▲ and ▼.
Max Volt:
set the maximum voltage of the power supply
Max Volt=
Setting the maximum voltage
Step Volt:
set the step voltage
Step=
After the step voltage set, the voltage value
increases or discreases equal to each step voltage
by pressing the key ▲ or ▼ once.
On
Activating the remote sense mode ( Rear-panel
measurement mode)
Off(Default)
Activating the front-panel measurement mode
mA
Set the unit of current is mA
A(Default)
Set the unit of current is A
